top of page

Raptor Tank Gauging

PRODUCTS & SOLUTIONS

2410-Tank-Hub-NoBackground.png

2410 Tank Hub

  • Handles data communication between field devices and the control room.

  • Feeds power to Rosemount Field Devices on the FISCO compliant intrinsically safe Tankbus

  • Calculate average temperature, observed density and strapping table based volume

  • Get two configurable output relays, ad one anaolog output for level alaram, all of which are SIL certified

5900s Parabolic-NoBackground2.png

5900S Radar Level Gauge

  • Accuracy: ± 0.5 mm (± 0.020 in)

  • Stability: Typically < ± 0.5 mm (0.020 in) in -40 to +158 °F

  • Update Rate: New Measurement every 0.3 second.

  • Increased Safety with 3rd party certified IEC 61508 SIL 2 or SIL 3 capability

  • Convenient and safe installation with 2-wire IS bus power supply

  • ​Measure in all bulk storage tank types and products, ranging from liquefied gases, light products, crude oil and bitumen

5900C Still Pipe Array-NoBG.png

5900C Radar Level Gauge

  • Accuracy: ± 2 mm (± 0.08 in)

  • Stability: Typically < ± 0.5 mm (0.020 in) in -40 to +158 °F

  • Update Rate: New Measurement every 0.3 second.

  • Increased Safety with 3rd party certified IEC 61508 SIL 2 or SIL 3 capability

  • Possible to integrate with legacy tank gauging systems

  • Measure in all bulk storage tank types and products, ranging from liquefied gases, light products, crude oil and bitumen

  • Include wired and/or wireless data transmission

5900c parabolic-NoBG.png

Parabolic Antenna

  • Best choice in tanks without still-pipe

  • Demanding Environments with sticky or condensing liquids

  • Antenna design gives extreme tolerance to product build-up and condensation

  • Measures all products ranging from light products to heavy fuel oil, bitumen and asphalt

  • Installation normally with tank in serviceIn certain cases, it can be used on tanks with floating roofs to measure the distance down to a target plate on the floating roof.

5900S Still Pipe Array-NoBackground.png

Still Pipe Array Antenna

  • Best choice in tanks with still-pipe

  • Demanding Environments with sticky or condensing liquids

  • Antenna design gives extreme tolerance to product build-up and condensation

  • Hinged hatch version enables easier product sampling and hand-dips on same gauge pole as radar

  • Measures all products ranging from light products to heavy fuel oil, bitumen and asphalt

  • Installation normally with tank in service. In certain cases, it can be used on tanks with floating roofs to measure the distance down to a target plate on the floating roof.

5900c lpg-noBG.png

LPG/LNG Antenna

  • Best choice for pressurized or cryogenic liquefied gas

  • Strong echo even under surface boiling conditions

  • Measurement verification with closed tank via reference device (See Datasheet Below)

  • Installation is made with the pressurized tank taken out of service

  • Built-in pressure sensor for vapor compensation gives best measurement performance

5900c Horn-NoBG.png

Horn/Cone Antenna

  • Designed for easy installation on fixed roof tanks, with smaller nozzles

  • Nozzles from 4 in. to 8in.

  • Communicates via a 2-wire, Intrinsically safe Tankbus for easy and safe installation

  • Measures on a variety of products except asphalt or similar for which the parabolic is recommended

2240s Temp Trandmitter-NoBackground.png

2240S Multi-Input Temperature Transmitter

  • Ultra-stable temperature measurement for precise inventory calculations and custody transfer for API chapter 7.3 compliance

  • Obtain outstanding temperature conversion accuracy of ±0.05 °C (±0.09 °F)

  • Connect up to 16 four-wire temperature elements

  • Include Integreated water level sensor

  • Two-Wire IS bus power supply 

644 Temp Transmitter-NoBG.png

644 Single Spot Temperature Transmitter

  • Dual and single sensor capability with universal sensor inputs (RTD, T/C, mV, ohms)

  • Output Signal: 4-20 mA /HART® protocol, FOUNDATION™ fieldbus protocol, PROFIBUS® PA protocol

  • Display/Interface: LCD Display or LCD Display with Local Operator Interface (LOI)

  • Calibration Options: Transmitter-sensor matching (Callendar-Van Dusen constants), 5-point calibration

2460 System Hub.JPG

2460 System Hub

  • Transfers tank gauging data to Rosemount TankMaster, Host and DCS systems

  • Ensure fast data update rate

  • Serves up to 64 tanks

  • Get real-time inventory calculations with API standard net volumes

  • Achieve instrument and system redundancy

3051s PT Dual-NoBG.png

3051S Coplanar

Pressure Transmitter

  • Use it in all storage applications, including crude oil tanks, pressurized tanks, and tanks with/without floating roofs

  • Measure with industry leading 0.025% pressure accuracy and density according to API chapter 3.6

  • Enable online mass and density calculation - no need for manual density sampling

  • Benefit from convenient and safe installation with two-wire IS bus power supply

bottom of page