top of page

PIE - Practical Instrument Electronics

Temperature Calibrators

Pie 510B - Single Type RTD Calibrator

Pie 211 - RTD Process Calibrator

Pie 511B - 10 Type RTD Calibrator

  • Accuracy: +/-0.25°C (+/-0.5°F) for Pt 100 Ohm RTD's

  • 0.1 degree resolution

  • Source One RTD Curve with Direct Temperature Output

  • Select-able °C or °F

  • Works with a variety of transmitters including Rosemount & Honeywell

  • Lightweight, Tough, Fits in the Palm of a Hand

  • EZ-Dial Knob and Switch

  • Compatible with device using pulsed excitation currents

  • Accuracy: +/-0.2°

  • Resolution to 0.1°F & °C

  • Source and Read Multiple RTD Curves Plus Ohms

  • Automatically Detect 2, 3, & 4 Wire Connections

  • Easily Change RTD Types & Scale

  • Guaranteed Compatible with all Instrumentation

  • EZ-Dial Knob and Switch

  • Includes Ribber Boot, Hands Free Carrying Case & RTD Leads

  • Accuracy: +/-0.25°C (+/-0.5°F) for Pt 100 Ohm RTD's

  • 0.1 degree resolution

  • Source 10 RTD Curves with Direct Temperature Output or Ohms

  • Select-able °C or °F

  • Works with a variety of transmitters including Rosemount & Honeywell

  • Lightweight, Tough, Fits in the Palm of a Hand

  • Compatible with device using pulsed excitation currents

Pie 311 - RTD Process Calibrator

Pie 525B - RTD & Thermocouple Calibrator

Pie 820 - Multifunction Process Calibrator

  • Accuracy: +/-0.2°

  • Resolution to 0.1°F & °C

  • Source and Read Multiple RTD Curves Plus Ohms

  • Automatically Detect 2, 3, & 4 Wire Connections

  • Easily Change RTD Types & Scale

  • Guaranteed Compatible with all Instrumentation

  • EZ-Dial Knob and Switch

  • Includes Ribber Boot, Hands Free Carrying Case & RTD Leads

  • Calibrate T/C Instruments to 0.1 & 0.01 °F & °C

  • Calibrate RTD Instruments to 0.1, & 0.01 °F & °C

  • °F & °C Accurate to 0.2°

  • Cold Junction Sensor accurate to 0.05°

  • Troubleshoot RTD Sensors & Instrumentation

  • Verify Resistance, Cold Junction Temperature & Output

  • Includes Boot & mV Leads

  • Faster Calibrations

  • Calibrate Milliamps, Volts, Thermo-couples, Ohms, RTD, & HZ

  • Source & Read 0 - 24 mA

  • Source 0 - 80 mV & 0 - 10.25 V

  • Read 0 -80 mV & 0 -60 VDC

  • Calibrate Temperature (15 Thermocouple Types, 10 RTD Types)

  • Flow & Vibration Systems (Source and Read 2000 CPM to 20.000KHZ

  • Includes Rubber Boot, Carrying Case, & mV/RTD Test Leads

Pie 535 - 10-50 mA & Voltage Process Calibrator

Pie 334 - 4-20 mA Loop Calibrator

Pie 541 - Frequency Process Calibrator

  • True +/- 0.025% of Reading

  • Read & Source 0 to 50.000 mA

  • Read 0 - 60.00 Volts with 2X over Range Ability

  • Simulate 2 Wire Transmitters

  • Power 2-Wire Transmitters & Read 0 - 50.000mA

  • Source 0 - 24.000 VDC with up to 20mA Output

  • Direct Calibration 1 - 5.000V

  • Fuseless Protection from accidental connector to 240 AC/DC

  • Include Carry Case & A/C Adaptor

  • Accuracyu: +/- 0.005% of Range

  • Source & Read 5 Ranges from 1CPH to 20.000 KHz

  • Totalize Input/ Outputs from 1 to 99999 pulses in 1 to 100.0 min

  • Source sine & square waves with zero based or zero crossing waveform

  • Adjustable output amplitude from 100 mV to 12 V peak to peak

  • Ez-Dial and Ez-Check Switch

  • Carrying Case Included

  • Calibrate Milliamp Instruments

  • Source 0 - 24.00 mA & -25.0 to 125.0% of 4-20 mA

  • Read 0 - 52.00 mA

  • Read -99.99 to 99.99 V

  • Simulate 2-Wire Transmiters

  • Power & Read 2-Wire Transmitters

  • Accurate to +/-0.025& of Span at 4.00 & 20.00 EZ-CHECK outputs

  • Includes Rubber Boot & Attached Test Leads
     

PIE Calibrators Come With a 3 Year Warranty

Not Seeing What You're Looking For? Give us a Call at 303-804-0667

Contact Us For a Quote:

Success! Message received.

bottom of page